Archive for the 'masking' Category

Charmed Birthday Fox

Friday, September 4th, 2015

   Hey, y’all! I know it’s been a while. I went on vacation (wasn’t a vacation… same job, different location) and then the day after we got back, school started. I’ve just been trying to keep my head above water since then. Oh, and I think my muse stayed in Florida. I did manage to get one card made since being back. I also have a couple I made before leaving that I’ll put up next week, but one needs the video(s) edited.


   I got the Charmed stamp set a bit ago from Mama Elephant. I just love foxes and owls! I wanted to keep this card pretty simple since I haven’t been feeling up to anything lately. Back to school colds suck. So, I used 80# Neenah to make my card base. This card measures 3.25″ x 6.25″. Tall and skinny, but not gigantic. I also used another layer of Neenah that I ran through my Big Shot with the Swiss Dots embossing folder. I know you can’t see it in the photos, but I promise it’s there! I mounted that on some craft foam. The images are colored on X-Press it cardstock. I cut the wreath and banner using the matching dies and mounted them using foam tape. The fox, I fussy cut (after layering the crown using masking) out and adhered the bottom using a liquid glue but the top with a piece of foam tape. Gives a little bit of dimension. I put her (She has eyelashes) on a circle I cut from Neenah and made a shadow using copics, but also made a yellow glow using Squeeze Lemonade distress ink.

You can see the dimension in the photo above.

I didn’t do any fancy coloring, just wanted to get back in to the swing of things.
All the Copic colors I used are listed below.


   For finishing touches, I used clear Wink of Stella on the banner and also on the crown. I also used a black glaze pen to go over the fox’s nose.


   For the inside, I wanted a really simple birthday greeting, so I decided to use one from MFT’s Birthday Bears set. I centered it using my MISTI and stamped using Lawn Fawn’s Wild Rose ink. I felt this matched the banner on front perfectly.

   I really hope you like my simple card. Any products I used are listed below.


Copics Used:

Fox: YR12, YR15, YR16, YR18; R02; E40, E41, E42, E43
Crown: C00, C1, C3
Wreath: YG11, YG13, YG17; YG61, YG63, YG67; YG93, YG95, YG99; G21, G24, G85; V20, V25
Ribbon: 0, R32, R35
Background: W0, W3


Supplies Used:


Window Peekers!!!

Wednesday, December 3rd, 2014

All products I’ve used in this post are linked at the bottom.

   Hey y’all! I’m running behind on blog posts! That could be a good thing, though. You know, I’m creating!!! I even have made DUPLICATES of cards! Well, not total duplicates, just same layout with different colors or papers. 🙂

   Shaker cards have been all the rage recently. I made my first shaker box about 10 years ago. These are my first shaker “cards” though. Same principle, just on a different type of project.

   Jennifer McGuire & Kristina Werner have recently done some tips and tricks on shaker boxes on their YouTube channels. Yes, shaker boxes are easy, but they had a few tips and tricks to make it easier! I definitely recommend watching them. Yes, I learned something new from each of them!

Jennifer McGuire’s video
Kristina Werner’s video


   I’ve been kicking myself that I have SO MANY cute Christmas sets and I haven’t been using them all! Plus, I have 36 people/families on my card list and I’ve made 11. Insert mean voice in my head “If you’d done 1 card a week this whole year, you’d be done by now.” Yes, my head tells me “I told you so”. Quite frequently…

   Okay, so back to the adorable little shakers! I decided to use the “No Peeking” set from Mama Elephant. Nichol Magouirk recently did a card that I got the idea from. Hers wasn’t a shaker card, and it didn’t use this stamp set, but she had Santa peeking in a window. 🙂 Y’all know me… I have to tweak everything!

   I cut out the window from the Peek-A-Frames die set, by Mama Elephant as well, in both Neenah Cream 80# cardstock and PTI Kraft cardstock. I also cut a piece of a transparency to a little larger than the whole window and adhered this to the window. Next, I took some stickles and made ice on the window panes. You can’t feel it because I put it on the outside of the windows, which is really the inside of the shaker part. I added 2 layers of foam tape around the window. I didn’t put it in between the panes. Then, I stamped the tree line from Lawn Fawn’s Snow Day stamp set, using SSS Olive ink, on some XPress-It cardstock. I made some masks using the white post-it tape and placed those as snow banks. After that, I used the inking tool and Tumbled Glass distress ink to make my sky and then made little dot with opaque white using a stylus. I stamped each of the critters from the set in a ink that would blend in. For the polar bear I did double stamping with Tuxedo Black ink. For the fox, I did double stamping with Rice Cocoa ink. The reindeer was going to be dark enough that I could just use the rich cocoa. I colored these in with my Copics and added some finishing touches like black glaze on their eyes and white glints after.

   


   I have 1 wish list thing for stamp and die manufacturers! Know how we have all these confetti dies? How about we get a snowflake confetti die where there are teeny tiny little snow flakes (about 3/8″ wide) and each one is different??? Would make for some GORGEOUS Christmas/Winter shaker cards! Okay, so I used my Martha Stewart border punch on some thin vellum and also some copy paper to make little shaker fillers. A die would have been so much easier as this paper punch is not working very well any more.

   I put my fillers on the colored panel and then lined my shaker front on top of it. After this, I stamped my greeting using SSS Lipstick Red ink. Please do this BEFORE putting foam tape. It would be so much easier! Before adhering this to the card front, I tied some Doodlebug Christmas twine into a bow. I cut and scored my cards from SSS Lipstick Red cardstock to be A4 (I know, shocker!!! I haven’t made a card this size in a LONG time!) top-folding cards. I’m trying to use up this twine because I have a roll of Lawn Fawn’s mistletoe twine coming. 🙂 I also went over the sentiment using the clear wink of stella pen.


   For the inside, I kept it nice and simple with some room for writing. 🙂 I stamped the sentiment in VersaMark ink and then Embossed it with Ranger Superfine White Embossing Powder.

   That’s it for my card! If you have any questions, please feel free to put them in the comments below. Also, if you’d like, I can make an instructional video on how I did these. 🙂


Copics Used:

Scarves: R27, R59, R89
Deer:
   Antlers: E44, E47, E49
   Fur: E23, E25, E57, E59
Fox:
   Fur: YR27, E07, E09; E50, E51, E55
Bear:
   Fur: W00, W1, W3, 0


Supplies Used:


It’s Lawn Fawn again!

Friday, September 19th, 2014

   Short post today. I’m going to try this out to see if it takes me less time to blog than make the card. 😉 I’m back again with another card I made from Lawn Fawn’s Joy to the Woods stamp set. This time, I made this one with my grandmother specifically in mind. The cardinal was the main reason I bought this stamp set! She loves cardinals!

   This card measures 9″ x 3.75″. Another card that isn’t a normal size for me. 😉 This was the first card I did with the masking technique. Like the last one, the background is done using the copic airbrush system. The birdhouse was an afterthought, so I added it with a rolled up glue dot. I just love how lovely the sentiment looks there!

If you’d like, maybe I can do a tutorial on how I did these two cards.


Copics Used

Cardinal: R29, R39, R89;
Birch Trees: E42, E43, E44
Sky: B21
Birdhouse: E43, E44, E47; R29; YG63, YG65, YG67


Supplies